Abocom AP900 Specification

Wireless 802.11g Access Point
The AP900 is an IEEE802.11g compliant Access Point, which lets you
connect your Wireless-802.11g or Wireless-802.11b devices to your
wireless network. The AP900 is not only 802.11b backwards compliant ,
but also provides a high-speed transfer rate of up to 54Mbps, which is
almost five times faster than that of wireless B products.
The AP900 can act as a Media Access Control (MAC) bridge between
wired Local Area Networks, and single/multi LAN wireless network(s).
The AP900 provides 64/128 bit WEP encryption and IEEE802.1x which ensures a high level of security to protects
users' data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your
Wireless LAN. Your network security is therefore double assured.
Moreover, the AP900 includes a DHCP server that will dynamically assign IP addresses to wireless clients, making it
an ideal solution for quickly creating and extending a wireless local area network (WLAN) in your workplaces.
Features
♦
High speed for wireless LAN connection up to 54 Mbps.
♦
Supports web browser-based configuration utility.
♦
Provides 64/128-bit WEP Encryption
♦
Provides MAC Address Filtering
♦
Provides IEEE 802.1x, enhancing WLAN security
♦
Built-in RADIUS authentication server based on the IEEE 802.1x standard
♦
AP Visibility Modes
♦
Firmware upgradeable
♦
Supports Static IP Address and DHCP
♦
Automatic Device Discovery