Table of Contents
Advertisement
Push the water drain hose onto
3.
the connection as far as it will go.
Insert the water drain hose into
4.
the hose guide.
Make sure that the water
drain hose is not kinked.
Connect the appliance to the
5.
water outlet.
→
"Connection types for water drainage",
Page 15
Tip: To collect the condensed water
again in the condensed water
container (e.g. if the location of the
device is changed), undo these steps
in reverse order.
Set up and connect NL
Water drainage connection types
PAY ATTENTION!
A clogged or closed drain can allow
accumulated waste water to flow back
into the unit.
Before using the device, ensure
▶
that the waste water drains quickly
and clears blockages.
Drain in a
siphon.
Drain in a
sink.
2
1
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
the water drainage
feeding hose with
a hose guide
thing on minimum
80 cm and maximum
times 100 cm
height confirmation
gene.
Remark: Of
the Y-divider
→ Page 29
can you replace the
water drain hose from
an additional device
rate like e.g.
a washing machine
on the same
connect feed from
the siphon.
the water drainage
feed hose com-
crack through the
slide bend
and with the
settlement material
fix eel.
Up the bend
maximum 100
cm height
settle.
15
Advertisement
Table of Contents
