Water Drain Hose - Siemens WQ41G2M0FG User Manual And Installation Instructions

NL Set up and connect

4.4 Water drain hose

During drying, condensation is
created that your appliance uses for
automatic cleaning. Use the water
drain hose to direct excess
condensation water into the
wastewater.
Remarks
s Use this device with the
supplied water drain hose. When you
connect the water drain hose
→ Page 14 , you do not need to
empty the condensed water container
moderately → Page 34 .
s You can use this optional
→ "Accessories", Page 29 at the
order service.
Connect water drain hose
If you do not wish to empty the
condensed water container of the device
regularly, connect the water drain hose.
PAY ATTENTION!
If the device is used without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
Before using the device, connect the
▶
condensate hose or the drain hose
in a professional manner.
Requirements
s The device and its accessories
are unpacked.
→ "Unpacking device", Page 12
s The appliance is on the installation
place set up.
→ "Requirements regarding the
installation site", page 13
14
Pull the condensate hose from
1.
the connection.
The condensate hose is connected to
the connection at the factory.
Remark: When removing the
condensed water hose, liquid
may escape from the
connection.
Push the condensate hose onto the
2.
holder.