Guarantee; Declaration Of Conformity - Qualcast XSS41C Assembly Manual

Guarantee

Dear Customer,
In the unlikely event that your device develops a fault, please contact our customer service
department on the telephone number shown below.
1. These guarantee terms cover additional guarantee rights and do not affect your statutory
warranty rights.
Claims must be accompanied by Proof of Purchase. This must be in the form of a sales receipt or
bank statement and must show that the product has been purchased within 2 years prior to the
claim, from the retailer that it was originally sold to.
2. Our guarantee covers problems caused by material or manufacturing defects, and will result
in the repair of these defects or replacement of the device with a like for like or similar article.
Please note that our devices have not been designed for use in commercial, trade or industrial
applications. Consequently, the guarantee is invalidated if the equipment is used in commercial,
trade or industrial applications or for other equivalent activities.
3. The following are also excluded from our guarantee:
A) Faults due to accidents, customer misuse, or unauthorized repairs
B) Consumable Parts such as Blades/ /Spark plugs or Filters
C) Failure due to lack of routine maintenance
D) Failure as a result of not using the equipment in accordance with the manual and safety
instructions
E) The adjustment of cables, drive belts, or recoil starters
4. The guarantee is valid for a period of 2 year starting from the purchase date of the device.
Guarantee claims should be submitted before the end of the guarantee period within two weeks
of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee
period. The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts fitted will not result in
an extension of the guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies when an on-site Service is used.
5. Please keep your sales receipt in a safe place. If the defect is covered by our guarantee your
device will either be repaired under the terms of guarantee or we will send you a replacement
device. This device may be re-conditioned or Like for like replacement.
Customer Helpline 0845 034 2279
20
www.gardenservicecentre.co.uk
Complete Product Support &
Aftersales Service 7 days a week.
Do you need help with this product?
Instead of returning your product please
call 0845 034 2279 7 days a week.
Or visit www.gardenservicecentre.co.uk
This does not affect your statutory rights.

Declaration of Conformity

0359
EC Declaration of Conformity
Homebase Ltd
We hereby certify that the product stipulated above complies with all the relevant provisions of the following EC new approach directive/s.
This declaration of conformity is issued under the sole responsibility of the manufacturer
Type of Product: Petrol lawn mower
Product Description: Photograph:
148cc,
-1
Maximum motor output 2.2kW at 3600min
Rating cutting speed 3000min -1
Diameter of trimming area 410mm
Hand push
Applicable EC Directives
2006/42/EC (MD) 2004/108/EC (EMC)
2006/95/EC (LVD) 2009/105/EC (Pressure)
89/686/EEC (PPE) 2009/48/EC (Toys)
2009/142/EC (Gas) 89/106/EEC (Construction)
Applicable
Harmonized Standards: Report Date
EN 836 -1997+A4-2011 2012-08-02
2012-08-02
EK9-BE-52/EK9-BE-43
ISO3744 2011-08-23
EN ISO14982:2009 2011-08-19
EC Type approval certificate number
SH12020433-V1 2012-08-02
Issued number: 1.0 Issued on : 2012-8-12
Creator: Max Shi
Position: QA
The associated technical file for this product can be found within Homebase Ltd idocument system
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
12
Year of 1st Issue .
489-499 Avebury Boulevard
Saxon Gate West
Milton Keynes
Buckinghamshire
MK9 2NW
Model Number: XSS41C
Cat / Article Number:131598
1999/5/EC (R&TTE)
2000/14/EC Annex , 2005/88/EC
L =96dB(A), L = 83dB(A), K=3dB(A)
WA PA
97/68 AS AMENDED BY 2004/26 /EC
Verification of conformity
Certificate Notified Body
MD 0359
EK9 0359
Noise 0359
EMC 0359
CE 0359
Signed :
Name : Roger Panton-Kent
Position: Head of Quality Assurance
21