Tripp Lite NPOE-EXT-2X1G30 Quick Start Manual page 7

Installation
Cable Wire and Crimp Steps
Installing Cable Gland with RJ45 UTP Cable
Step 1: Disassemble the cable gland as shown below:
Step 2: Slip the Ethernet cable through the clamping nut and
gland body. Tighten the clamping nut and the body to
make the two parts into one complete cable gland.
21-06-161-933F47-EN.indd 7 21-06-161-933F47-EN.indd 7
A
Clamping Nut
B
Body (with washer)
A
B
7
8/19/2021 11:12:08 AM 8/19/2021 11:12:08 AM