Tool specifications
Model number
Stock number
Square drive
Bolt capacity
Anvil retainer type
Impact mechanism
Maximum torque
Working torque
Free speed
Blows per minute
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
JAT-102 Impact Wrench
JAT-102
505102
1/2 in.
1/2 in.
Hog ring
Single hammer rocking dog clutch
250 lbf•ft (338.96 N•m)
50-200 lbf•ft (67.8-271.2 N•m)
8,000 RPM
600
4 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
11.6 m/s
108 dB(A)
4 air regulator settings, forward and reverse
Pistol style
7-1/4 in. (184.2 mm)
Aluminum
4.9 lb. (2.22 kg)
5.42 lb. (2.46 kg)