Tool Specifications - Jet JAT-124 Operations & Parts Manual

Tool specifications

Model number
Stock number
Square drive
Bolt capacity
Anvil retainer type
Impact mechanism
Maximum torque
Working torque
Free speed
Blows per minute
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6 JAT-124 Impact Wrench
JAT-124
505124
1/2 in.
9/16 in.
Hog ring
Jumbo hammer
180 lbf•ft (244.05 N•m)
45-140 lbf•ft (61.01-189.81 N•m)
7,000 RPM
1400
5 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
43.5 m/s
108 dB(A)
2-speed forward, 1-speed reverse
Inline
13.4 in. (340.36 mm)
Aluminum alloy with plastic shell
3.97 lb. (1.8 kg)
4.19 lb. (1.9 kg)