Leds; Front Panel Components - JOLIN LAB TABOR Build Manual

LEDs:

Short leg goes into the square pin (bottom).
Remember that Y stays for yellow LEDs, R for red, G for green
and B for blue
tip: the closer to the PCB, the more they will be diffused
on the panel's hollow window.
1 D21
1 D22
1 D16
1 D14
1 D3
2 D19, D20

front panel components:

Wait to solder them: just place all of them in the right place and move to the next step.
4 1F1, 2F1, 2M1, 1M1
2 4F1, 4M1
12 J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13
now flip the board (front layer):
Y_3mm
R_3mm
G_5mm
Y_5mm
R_5mm
B_5mm
50k (6.35mm round shaft)
10k (6.35mm round shaft)
PJ398SM aka "Thonkiconn"
3