Install The Print Head - Canon Pixma MP640 series Getting Started Manual

Install the Print Head

• Handle the Print Head carefully. Do not
drop or apply excessive pressure to it.
1
C
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B)
until it stops.
Close the Document Cover (C) and lift it with the Scanning Unit (Cover).
• The Print Head Holder makes a noise as it moves. This is normal operation.
• If the Print Head Holder does not move, make sure that the machine is turned on.
C
A
2
B
Make sure that the Print Head Holder
(D) moves to the installation position.
Hardware Setup
D