Canon Pixma MP640 series Getting Started Manual page 48

Install the Software (Information)
2
Click Exit to complete the installation.
If Restart is displayed, follow the instruction to restart the computer.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
When using Macintosh, it is necessary to restart the computer before scanning using the
Operation Panel on the machine for the first time.
 Network Connection
Using the Machine from Additional Computers
Now that the wireless/wired connection of the machine is complete,
it can be used from additional computers on the same network.
Install software including the drivers on the computer from which
you want to use the machine. Other settings are not required.
For the software installation procedure, refer to
Connection] Install the Software" on page 34
Computer from which the
machine can be used currently
Additional computers on
the same network
"[Network
.