Canon Pixma MP640 series Getting Started Manual page 30

Wireless Setup Using WPS (Wi-Fi Protected Setup)
7
Press and hold the WPS button on the access point
(for about 5 seconds), then press the OK button on the
machine within 2 minutes.
For details on the WPS button pressing, refer to the manual of
your access point.
The Wi-Fi lamp (blue) flashes while searching for an access point.
• If the timeout error screen appeared repeatedly, or if another error appeared, refer to the printed manual: Network Setup Troubleshooting.
 Network Connection
8
C
When the completion screen appears, press the OK
button, then press the HOME button (C).
The standby screen returns.
Next, read "Confirm
Connection Status" on
page 32!