Canon Pixma MP640 series Getting Started Manual page 35

4
Select Confirm LAN settings, then press the OK
button.
5
Select Wireless LAN setting list or Wired LAN setting list, then press the OK button.
Make sure that Connection is set to Active, then press the HOME button.
It may take a while before the connection is complete. In this case, press the Back button (C) and wait for about
a minute, then display the Wireless LAN setting list screen or Wired LAN setting list screen again.
• If the communication status does not improve, make sure of the following.
− The machine and network device are turned on.
− There is no obstacle between the machine and access point, and wireless communication is possible.
− There is no microwave, refrigerator or any other object that may cause radio interference nearby.
− For wired connections, the Ethernet cable is connected properly.
Now the machine is connected to the network.
Next, read "[Network Connection] Install the Software" on page 34.
C
Confirm Connection Status
Network Connection