Canon Pixma MP640 series Getting Started Manual page 14

Align the Print Head
3
Make sure that a pattern similar to
the one shown in the illustration is
printed.
Remove the printed paper, then close
the Paper Output Tray (D).
• When an error message is displayed on
the LCD, press the OK button to clear
the error, then go to the next step. After
the installation is complete, perform Print
Head Alignment by referring to "When
Printing Becomes Faint or Colors are
Incorrect" in the on-screen manual:
Basic Guide.
• The pattern is printed in black and blue.
 Hardware Setup
4
3
1
D
Confirm the message on the LCD, follow the procedure below to load plain paper into the Cassette (E), then press the
OK button.
1
Slide the Paper Guide to align with the actual size of the paper.
2
Load paper along the right edge of the Cassette.
3
Slide the Paper Guide against the left edge of the paper.
The standby screen is displayed on the LCD.
Print Head Alignment is now complete.
• For details, refer to "Loading Paper" on page 47.
2
E