Service Mode Table (Wireless) - Panasonic SA-PT660P Service Manual

8.5.

Service Mode Table (Wireless)

By pressing various button combinations on the player and remote control unit, you can activate the various service modes for
checking.
8.5.1. Service Mode Table 1
Item
Mode Name
ID Setting To set the ID in the Tx & Rx. The
system goes into "Pairing Mode".
[P] will be displayed for 60 seconds to
indicate it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
Note: Carry out pairing when Tx or Rx
has been changed.
Note : W1
pairing. When pairing is successfully
completed,upon next power-up
W2
and/or
Active To check the type of transmitter
Transmitter inserted into the main unit. There are
Type Display two types of transmitter card. (Type A
& Type B).
Type A: FX65 & Wireless Active
Woofer
Type B: FX85 (For multiroom features)
When a transmitter card is inserted into
main unit (PT660/760/960), FL displays
the type of card:
Type A
W1
W1 W2
Note: If transmitter card is not inserted
properly or operation abnormally,
or W2 will blink. Pairing may be
necessary.
Description
and/or W2 will blink during
W1
will not blink.
Type B
W1
FL Display
(Display 1 - Transmitter is Type A)
(Display 1 - Transmitter is Type B)
35
SA-PT660P / SA-PT660PC
Key Operation
Front Key
In CD/DVD mode.
(with no disc inserted)
W1 W2
Press and hold [FAST
FORWARD] button on the
main unit.
Press the on main
unit or remote control to
exit the pairing mode.
W1
W1 W2