Sales Demonstration Lock Function - Panasonic SA-PT660P Service Manual

Error
Diagnosis Contents
Code
PDRV Cam gear/gear
assembly abnormal
UDU UD base assembly
abnormal
UDD UD base assembly
abnormal
UD1 UD base assembly
abnormal
F1NG Fail - safe mode.
(For open/close tray
unit(s))
F2NG Fail - safe mode.
(For open/close tray
unit(s))
RSET Cam gear jam/close
sensor faulty
8.7.

Sales Demonstration Lock Function

This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function.
"LOCKED" is displayed on the unit, and ordinary operation is disabled.
8.7.1. Setting
• • • • Prohibiting removal of disc
1. Select the DVD/CD function.
2. At POWER ON condition, press and hold down the
seconds. (The message, "LOCKED" appears when the function is activated.)
Note:
OPEN/CLOSE button is invalid and the main unit displays "LOCKED" while the lock function mode is entered.
• • • • Prohibiting operation of selector and disc
Description of error
Cam gear does not move from
"HOME" to "PLAY" drive
position.
UD base assembly does not
move upwards from tray 5 to
tray 2.
UD base assembly does not
move downwards from tray 1
to tray 5.
UD base assembly does not
move to tray 1.
When the tray open operation
is performed, it fails to open. It
will automatically close all
trays after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
When the tray open operation
is performed, it fails to close. It
will automatically close all
trays after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
During tray re-open, the cam
gear will rotate in the opposite
direction to reset the cam gear
position. When it fails, the
error code will appear.
Automatic FL Display
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
button and the power button on the main unit for at least three
41
SA-PT660P / SA-PT660PC
Remarks
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.