Wireless Service Mode Summary Table; Service Mode Table (Wireless) - Panasonic SA-PT875GA Service Manual

6.3.

Wireless Service Mode Summary Table

The service modes can be activated by pressing various button combination on the player and remote control unit.
Below is the summary of major checking:
Player buttons Remote control unit buttons
FAST FORWARD
STOP
(only in AUX)
Note:
Main room refers to the location of the main unit.
6.4.

Service Mode Table (Wireless)

By pressing various button combinations on the player and remote control unit, you can activate the various service modes for
checking.
6.4.1. Service Mode Table 1
Item
Mode Name
ID Setting To set the ID in the Tx & Rx. The
system goes into "Pairing Mode".
[P] will be displayed for 60 seconds to
indicate it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
Note: Carry out pairing when Tx or Rx
has been changed.
3 ID setting
4 RF channel 1 display
5 RF channel 2 display
6 RF channel 3 display
7 Auto RF channel display
Description
Application
FL Display
Note : will blink when a new transmitter
W1
card is inserted or when the Receiver
module P.C.B.(Rx) had been changed.
It will stopped when pairing is completed.
34
Note
(Refer to
"6.4.1. Service
Table 1" for more informa-
tion).
(Refer to
"6.4.2. Service
Table 2" for more informa-
tion).
Key Operation
Front Key
In CD/DVD mode.
W1
Press and hold [FAST
FORWARD] button on the
main unit, and [3] button
on the remote control unit.
Press the on main
unit or remote control.
the section
Mode
the section
Mode