Replacement Of Regulator Diode (D5801); Replacement Of Regulator Diode (D5802) - Panasonic SA-PT660P Service Manual

9.21. Replacement of Regulator
Diode (D5801)
• • • • Follow (Step 1) to (Step 3) of Item 9.3.
• • • • Follow (Step 1) to (Step 7) of Item 9.12.
• • • • Follow (Step 1) to (Step 6) of Item 9.18.
Step 1 Desolder pins of the regulator diode (D5801) on the
reverse side of SMPS P.C.B.
Step 2 Remove 1 screw from the regulator diode (D5801).
Step 3 Remove the regulator diode (D5801) from the heatsink
unit C.
Caution: Handle the heatsink unit C with caution due to its
high temperature after prolonged use. Touching it may
lead to injuries.
Note: Refer to the diagrams of SMPS P.C.B. (Item 20.5.) for
location of the part.
9.21.1. Assembly of Regulator Diode
(D5801)
Step 1 Apply grease to the heatsink unit C.
Step 2 Fix and screw the regulator diode (D5801) to the
heatsink unit C.
Special Note: Ensure the regulator diode (D5801) is tightly
screwed to the heatsink unit C.
Step 3 Solder pins of the regulator diode (D5801) on the
reverse side of SMPS P.C.B.
Special Note: Ensure pins of the regulator diode (D5801) are
properly seated and soldered on SMPS P.C.B.
9.22. Replacement of Regulator
Diode (D5802)
• • • • Follow (Step 1) to (Step 3) of Item 9.3.
• • • • Follow (Step 1) to (Step 7) of Item 9.12.
• • • • Follow (Step 1) to (Step 6) of Item 9.18.
Step 1 Desolder pins of the regulator diode (D5802) on the
reverse side of SMPS P.C.B.
Step 2 Remove 1 screw from the regulator diode (D5802).
63
SA-PT660P / SA-PT660PC