Digital Watchdog MEGApix Pano DWC-MBW8Wi2TW User Manual page 56

Setup - Security Setup
IEEE 802.1X Configuration
1
2
3
4
5
6
7
8
9
The feature is needed when connecting the camera to the network protected by the IEEE 802.1X.
IEEE 802.1x - Enable or disable the IEEE 802.1x feature.
1
Protocol
2
• MD5: It provides one-way password-based network authentication of the client.
• PEAP: It is similar to TTLS in that it does not require a certificate on the client-side.
• TTLS/MD5: It does not require a certificate on the client-side.
• TLS: It relies on client-side and server-side certificates to perform authentication.
EAPOL Version - Select the EAPOL Version.
3
ID - Type the ID to identify the client in the IEEE 802.1X authentication server.
4
Password - Type the Password to identify the client in the IEEE 802.1X authentication server.
5
Verify - Verify Password.
6
CA Certificate - Select the CA certificate required for TLS, TTLS, and PEAP authentication.
7
Certificate - Select the client certificate required for TLS authentication
8
Click 'Apply' to save all settings.
9
55