Digital Watchdog MEGApix Pano DWC-MBW8Wi2TW User Manual page 24

Setup - Camera Setup
Camera Day and Night Settings
1
2
3
4
5
6
7 7
Day and Night
1
• Auto: In this mode, the IR cut filter is removed automatically depending on the light condition around.
• Day: In this mode, the IR cut filter is applied to the image sensor all the time. Thus, the sensitivity will be
reduced in the dark light condition, but better color reproduction performance is obtained.
• Night: In this mode, the IR cut filter on the image sensor is removed all the time. The sensitivity will be
enhanced in the dark light condition, but the image is black and white.
• Schedule: In this mode, Day/Night mode is converted accordance with the scheduled time.
Color Level - It is a level to change Night mode into Day mode when Day and Night mode is Auto.
2
B/W Level - It is a level to change Day mode into Night mode when Day and Night mode is Auto.
3
Transition Time - If it is set to Auto, to determine the rate at which Day/Night is converted.
4
If it is set to schedule mode, Set the time that Day/Night is converted.
5
IR Mode - turn the built-in IR LEDs on or off manually.
6
Click 'Save' to save all settings.
7
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
23