Table of Contents
Advertisement
Adjusting the oven door
Whilst installing the oven, you may
wish to adjust the final position of the
door. The following allows for ± 1.5mm
adjustment:
•
Loosen the nut (1) with a size 13
spanner.
•
Use a size 4 allen key to rotate the
spindle (2) in a 180° range.
•
Once adjustment is complete, tighten
the nut (1) whilst holding the allen key
in place in the spindle (2).
Mains electrical connection
Warning! This appliance must be earthed.
This appliance is intended to be connected to fixed wiring by a
double pole switch, having a contact separation of at least 3mm
in all poles and protected by a 13A fuse. The switch must be
positioned no further than 2m from the appliance.
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T and local regulations. The wires in the mains lead are
coloured in accordance with the following code:
GREEN AND YELLOW = EARTH, BLUE = NEUTRAL, BROWN =
LIVE.
34
1
Fig. 18
2
Advertisement
Table of Contents
