Setting Surface Controls - LG LRE3012SB Owner's Manual & Cooking Manual

SURFACE CONTROLS COOKING

SETTING SURFACE CONTROLS

When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Left Front)
1. Press ON/OFF pad for the desired
element position. The display will
flash "
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
2. Press (
power level "Hi" or (
for "Lo".
3. Use the (
the desired power setting.
( )/(
accessible. (Adjustable at any time
while the element is ON.)
4. To turn off the unit after cooking,
press the ON/OFF pad once.
Note:
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5
from 9.0 through 3.0. (by 0.2 from 3.0 through
1.0)
• Lo is the lowest power level available.
Note:
To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
• NEVER leave food unattended at high or
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.
".
) pad once to turn on the
) pad once
)/( ) pad to choose
) pad is continuously
- 9 -
To turn on a dual surface unit (Right Front)
1. Press the ON/OFF pad. The display
will flash "
(If no further pads are pressed within
10 seconds, the display will disappear.)
2. Press the ELEMENT SIZE pad as
needed to select the desired burner
size. Default size is 9". When first
selected, 12" size is ON. The light
above the ELEMENT SIZE pad
indicates which size surface unit is on.
3. Press (
power level "Hi" or (
"Lo".
4. Use the (
desired power setting. (
continuously accessible. (Adjustable at
any time while the element is ON.)
5. To turn off the unit after cooking, press
the ON/OFF pad once.
Note:
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
• Lo is the lowest power level available.
Note:
To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
Setting
HIGH Start most foods, bring water to a
(8.5 – Hi) boil or pan broiling.
MEDIUM HIGH Continue a rapid boil, fry or deep fat
(5.5 – 8.0) fry.
MEDIUM Maintain a slow boil, thicken sauces
(3.5 – 5.0) and gravies or steam vegetables.
MEDIUM LOW Keep foods cooking, poach or stew
(2.2 – 3.0) (2.8 or lower is a simmer setting).
LOW/SIMMER Keep warm, melt or simmer.
(Lo – 2.0)
".
) pad once to turn on the
) pad once for
)/( ) pad to choose the
)/( ) pad is
Type of cooking