Advertisement
Getting Started
3.
Charging
Insert the AC connector to the DC port on the device and connect the
power adapter to the wall socket for charging.
Normally it takes approximately 3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
4.
Power on/Power off
Press and hold the Power button to turn on the device. It will
automatically enter the Home screen after the start-up screen.
Press the Power Button once to enter sleep mode and press it again
to awake the device.
Press and hold the Power Button, and then tap on Power
off/Standby to power off the device or to enter sleep mode.
5.
Resetting device to default settings
Press and hold the Reset button for a few seconds to reset the
device's settings to default ones. All user settings will be lost
6.
Startup wizard
When using the device for the first time (or after resetting all user's
personalized settings) the device will automatically launch the
Startup Wizard.
The Startup wizard interface will offer to choose the system
language from the language list and the Time Zone.
During the Startup Wizard the device's accelerometer will be
calibrated. To perform the calibration, please, follow the on-screen
instructions.
EN – 2
Quick Start Guide
Prestigio MultiPad
PMP5100
PMP5100
Advertisement
