Product Model PMP5588C_DUO Photo (silk printing on back cover just for reference) System Physical Standard Configuration: Type Details Descriptions Amlogic AML8726-MXS Chipset Chipset Dual Core ARM Cortex A9 Type 1.5GHz Frequency Mali 400 MP ( Dual Core) Renderer 400MHz Frequency OPENGL ES2.0 OPENGL Type...
Page 3
Support Music Support MoviePlayer Support FileBrowser Support AppInstaller Support Settings Package and shipping information 1 pcs Prestigio MultiPad 1 pcs Optional Legal and Safety Notices Optional Warranty card Optional OTG Cable 1 pcs USB Calbe Package contents Power Adapter Switchable adaptor...
Page 14
Maintainance for Defect of PMP5588 Fault diagnosis and maintainance Item Fault Phenomenon Possible Reasons Maintainance 1、Battery run out 1、Check if charger is with charging icon 2、POWER button on keyboard with defect 2、If charging icon appears and cannot power on, POWER 3、system halted...
Page 28
Power Tree 1 cell lithium battery <Boost> <MOS> <MOS> VCCx2 VCC5V HDMI_PW <MOS> USB_OTG_PWR Keep power on in off state VCCx VCC_AMP keep power on in sleep# state Only power on in Active state <MOS> <Boost> VCCx3 LCD_AVDD <Boost> LED backlight For option <DC/DC>...
Page 29
ST-0269S00-061-182 ST-0269S00-061-182 ST-0269S00-061-182 ST-0269S00-061-182 HPMIC HPCOM HPDET J401 J401 J402 J402 HPCOM HPMIC HPCOM HPDET CON6_05 CON6_05 Title Title Title <Title> <Title> <Title> Size Size Size Document Number Document Number Document Number <Doc> <Doc> <Doc> <RevCode> <RevCode> <RevCode> Date: Date: Date: Friday, April 20, 2012 Friday, April 20, 2012...
Page 32
1.Copy the following files to TD root directory: factory_update_param.aml g11refE8HDS-ota-20130321.zip patch_ASBIS.zip recovery.img u-boot.bin (ZIP files are not to be decompressed.) 2.Insert the TF card into the unit, and make sure the tablet is powered off. 3.Press "Volume+" and "Power" button unitl 3 seconds after you see the booting logo, let go of the "Power"...
Page 33
Introduction for record SN into the service...
History Record of Revised version Date Version specification Composer 2012-4-22 Pan Guozhi Introduction to Interface Burning Interface...
Page 35
:click to start burning automatically Start Button Stop button: click to start burning automatically :If you are to burn “key” such as Button to burn “key” mac address, check the corresponding box directly. License documents that are corresponding to key should be provided before burning “key” . For example, usid’s license document is usid.ini, which should be put into USB-Burning-tool-v1.6.1.1228\license;...
Page 36
Port status: Connect means connected to devices;Disconnect means not connected to devices;failed implys problems occur or burning failed when connecting;Success implys successful burning. Device information: this information is port’s corresponding physical info, if the device info is blank, it suggests that the device has not been corresponded to physical port or the port is not connected to devices.
Page 37
the example of resource-gadmei.zip) 。 The script of usid.ini in the license folder should be configured accordingly. And do the following configuration according to requirements of ASBIS order. [Group1] base=PMP1101302 start=00001 --start from serial number 1 end=50001 --end at 50001 total=50000 --total is 50000 used=0...
Page 38
12.(take the example of port2, if there are several devices to be upgraded, several progress bars will be in similar case): picture 12 F. After 5 minutes, when burning is done, progress bar disappears and status bar change between two status Success/Disconnect, and the color of port2 change between two colors green/gray, as shown in picture 13:...
Page 39
picture13 Then system upgrade is finished. This tool allows a maximal of upgarding eight devices at one time. Processes are similar to that of port2. Notice Already upgraded device can enter into burning mode via key combination, which is determined according to different programs(EBHDS is a combination of power and volume-decrease button).Procedure should be first connecting the device to correspondent port, then press key combination.
Need help?
Do you have a question about the PMP5588 and is the answer not in the manual?
Questions and answers