ZyXEL Communications PLA6457 User Manual page 26

Figure 13 Multicast Screen
The following table describes the labels in this screen.
Table 10 Multicast Screen
LABEL DESCRIPTION
Multicast Configuration
IGMP Snooping Select YES to allow the
MLD Snooping Select YES to allow the
members who wish to receive multicast packets. Otherwise, select NO to disable it.
IGMP/MLD This field is only available when IGMP Snooping is YES.
broadcast report
Select NO to drop IGMP/MLD reports until a multicast member is discovered. Then the reports
are sent to the member.
Select YES to have the
IGMP/MLD This field is only available when IGMP/MLD broadcast report is YES.
broadcast report
• Select 0 to allow the
mode
unknown.
• Select 1 to allow the
• Select 2 to allow the
unknown.
Filter unknown Select YES to allow the PLA to listen to multicast traffic on networks defined by multicast groups
multicast traffic only. Otherwise, select NO to disable it.
IGMP Multicast Up to 4 multicast IP address ranges can be configured defining the minimum and maximum IP
ranges addresses of each range. Only multicast traffic within these ranges will be processed by the
.
PLA
This field is only available when IGMP Snooping is NO.
Click Ok for the changes to take effect.
Chapter 3 Web Configurator
PLA
to learn multicast group. Otherwise, select NO to disable it.
PLA
to discover the presence of MLD (Multicast Listener Discovery)
PLA send
IGMP/MLD reports according to the next field.
PLA to send
IGMP/MLD reports even when the video source is
PLA
to always send IGMP/MLD reports.
PLA to send
IGMPv3 IGMP/MLD reports even when the video source is
PLA6457 User's Guide
26