Table of Contents
Advertisement
If the window detects the resistance
while the power window switch is
pulled up continuously, the window
will stop upward movement then
lower approximately 2.5 cm (1 in.).
And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered
by the automatic window reversal
feature, the automatic window rever-
sal will not operate.
✽ ✽ NOTICE
The automatic reverse feature is
only active when the "auto up" fea-
ture is used by fully pulling up the
switch. The automatic reverse fea-
ture will not operate if the window is
raised using the halfway position on
the power window switch.
WARNING
Always check for obstructions
before raising any window to
avoid injuries or vehicle damage.
If an object less than 4 mm (0.16
in.)
in
diameter
is
between the window glass and
the upper window channel, the
automatic reverse window may
not detect the resistance and will
not stop and reverse direction.
Features of your vehicle
Power window lock button
■ Type A
caught
■ Type B
The driver can disable the power
window switches on the rear passen-
ger's doors by pressing the power
window lock switch to the lock posi-
tion (pressed).
ORP042014
ORP042014L
4 31
Advertisement
Table of Contents
