Table of Contents
Advertisement
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1
Press CD qh to select the CD function.
2
Press PLAY MODE 5 repeatedly until "PGM" appears
while the player is stopped.
3
Press ./>
repeatedly until the desired
qa
track number appears .
When programming MP3 les, press
+/–
qf
repeatedly to select the desired group, and then select
the desired le.
Selected track
Total playing time of program
or le number
(including selected track or le)
4
Press ENTER
qd
to add the track or le to the
program.
"– –.– –" appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press N
(play)
e;
.
The program remains available until you eject the
disc. To play the same program again, select the CD
function, and press N (play)
e;
.
To cancel Program Play
Press PLAY MODE
5
repeatedly until "PGM"
disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR
wl
while the player is stopped.
To view program information, such as total
track number of the program
Press DISPLAY
4
repeatedly.
Tip
You can also use the jog dial qs on the unit to select les in step 3.
Turn the jog dial qs and press PUSH ENTER qd on the unit to select
the desired group, and then select the desired file.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see "Listening to the
radio").
2
Press TUNER MEMORY
ea
.
Preset number
3
Press +/–
repeatedly to select your desired
qa
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER
.
qd
5
Repeat steps 1 through 4 to store other stations
You can preset up to 20 DAB, 20 FM and 10 AM
stations. e preset stations are retained for about half
a day even if you disconnect the power cord or if a
power failure occurs.
6
To call up a preset radio station, press TUNING
MODE
5
repeatedly until "PRESET" appears, and
then press +/–
qa
repeatedly to select the desired
preset station.
Note on presetting DAB stations
You can preset a DAB service only when it can be received.
Recording onto a tape
You can record on a TYPE I (normal) tape in two ways:
CD Synchro Recording:
You can record an entire CD onto a tape.
Manual Recording:
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
1
Load a recordable tape with the side you want to
record facing forward.
2
Prepare the tape deck for recording.
Press FUNCTION
8
repeatedly to select the tape
function.
Press DIRECTION
5
on the unit repeatedly and
select "g" to record on one side, or "h" or "j"
to record on both sides.
To switch the recording sides of the tape, press
TAPE nN (play)
9
repeatedly ("B" appears for
recording on the front, and "b" for the reverse side),
and then press TAPE x (stop)
9
.
3
Prepare the recording source.
For CD Synchro Recording:
Press FUNCTION
repeatedly to select the CD
8
function.
Load the disc you want to record.
When recording a group from an MP3 disc, press
PLAY MODE
repeatedly to select "
,
" and then
5
press
+/–
qf
repeatedly to select the desired
group.
To record only your favorite CD tracks in your desired
order, perform steps 2 through 5 of "Creating your
own CD program."
For Manual Recording:
Select the desired source to record.
4
Set the tape deck to stand by for recording.
For CD Synchro Recording:
Press CD SYNCHRO
7
.
For Manual Recording:
Press TAPE z REC
9
.
5
Start recording.
While recording, you cannot listen to other sources.
For CD Synchro Recording:
Press TAPETAPE X (pause)
9
. When the recording is
completed, the CD player and the tape deck stop
automatically. If both sides of the tape are being
recorded on, and the tape reaches the end of the front
side part-way through a track, the entire track is
recorded again from the beginning of the reverse side.
For Manual Recording:
Press TAPETAPE X (pause)
9
, and then start playing the
desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
To stop recording
Press TAPE x (stop) 9 or CD x (stop) qk (for CD
Synchro Recording only).
To pause recording (Manual Recording only)
Press TAPETAPE X (pause)
9.
Notes
• Recording stops if you change to a dierent function.
• You cannot eject the disc during CD Synchro Recording.
Tips
• If you stop the CD Synchro Recording by pressing CD x (stop)
the tape stops aer making about a 4 seconds blank (unrecorded)
space before stopping.
• When you record on both sides, be sure to start from the front side.
If you start from the reverse side, recording stops at the end of the
reverse side.
Using the Timers
The system offers three timer functions. You cannot
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. is function works even if
the clock is not set.
Press SLEEP
on the remote repeatedly. If you select
es
"AUTO," the system automatically turns off after the
current disc or tape stops or in 100 minutes.
Play Timer:
You can wake up to CD, tape or tuner at a preset time.
Rec Timer:
You can record a preset radio station at a specied time.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
1
Prepare the sound source.
For Play Timer:
Prepare the sound source, and then press VOLUME
+/–
qj
to adjust the volume.
To start from a specic CD track or MP3 le, create
your own CD program.
For Rec Timer:
Tune in the preset radio station.
2
Press CLOCK/TIMER SET
wg
.
3
Press ./>
qa
repeatedly to select "PLAY SET?"
or "REC SET?" then press ENTER
qd
"ON TIME" appears, and the hour indication ashes.
4
Set the time to start playing or recording.
Press ./>
qa
repeatedly to set the hour, and
then press ENTER
qd
.
The minute indication flashes. Use the procedure
above to set the minute.
5
Use the same procedure as in step 4 to set the time
to stop playing or recording.
6
Select the sound source or prepare the tape.
For Play Timer:
Press ./>
qa
repeatedly until the desired
sound source appears, and then press ENTER
display shows the timer settings.
For Rec Timer:
Load a recordable tape and press TAPE
9
the tape function.
Press DIRECTION
5
on the unit repeatedly and
select "g" to record on one side, or "h" or "j"
to record on both sides.
To switch the recording sides of the tape, press N
(play)
e;
repeatedly ("B" appears for recording on the
front, and "b" for the reverse side), and then press x
(stop)
qk
.
7
Press I/1 (power)
1
to turn o the system.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
To activate or check the timer again
Press CLOCK/TIMER SELECT
, press ./>
wg
repeatedly until "PLAY SELECT?" or "REC SELECT?"SELECT?""
appears, and then press ENTER
qd
.
To cancel the timer
Repeat the same procedure as above until "TIMER
OFF?" appears, and then press ENTER
qd
.
To change the setting
Start over from step 1.
Tips
• The Play Timer setting remains as long as the setting is not canceled
manually.
• The Rec Timer is canceled automatically after the Rec Timer has
been activated.
• The volume is reduced to minimum during the Rec Timer.
qk
,
HCD-CPZ1DAB
.
qd
. The
to select
qa
5
Advertisement
Table of Contents
