Table of Contents
Advertisement
HCD-CPZ1DAB
CD SERVO TEST MODE
• This mode used to ckeck operation of optical pick-up.
Procedure:
1. Press the I/1 key to turn the power ON.
2. Press the [FUNCTION] key to select "CD".
3. Press three keys of [PLAY MODE/DIRECTION/TUNING MODE],
l m and x (CD) simultaneously.
4. When the CD servo test mode is activated, optical pick-up
moves.
CD POWER MANAGE
This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press the I/1 button again to turn the power off (standby).
4. While pressing the x (CD) button, press the I/1 button.
5. It turns power on and display "CD POWER", then display
"ON" or "OFF".
18
Advertisement
Table of Contents
