fantastic furniture Como Dresser 6 Drw Manual page 9

Step 12
You will need
6 x Dowels 6 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
Two People
Required
Insert 6 x Dowels (H1) into
Side Panels (P2,P3) and Divider (P4).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2,P3) and Divider (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
Step 13
You will need
28 x Small Phillips Head
Screws (H5) Screwdriver
Two People
Required
Put 2 x Back Panels (P9) into the groove on
the back of the chest ,screw them with
28 x Small Screws (H5). Holes are not pre-drilled so you need to
put some pressure with screwdriver to get started. Lift unit back up.
fantasticfurniture.com.au
(P1)
H1
H1
H4
(P2)
H4
H4
H1
(P9)
(P9)
H1
(P3)
H5
H5
Page 9