fantastic furniture Como Dresser 6 Drw Manual page 6

Step 4
You will need
9 x Small 3 x CL Runner
Screws (H5) Tracks (H6)
Phillips Head
Screwdriver
Attach 3 x CL Runner Tracks (H6) to Divider (P4) with 9 x Small Screws (H5) by
tightening with the Phillips Head Screwdriver.
Step 5
You will need
9 x Small 3 x CR Runner
Screws (H5)
Tracks (H7)
Phillips Head
Screwdriver
Turn Divider (P4) over to the other side, and then attach 3 x CR Runner Tracks (H7)
with 9 x Small Screws (H5).
Step 6
You will need
1 x Dowels 1 x Cam Bolts
(H1) (H3)
Phillips Head
1 x Cam Nuts
Screwdriver
(H4)
Insert 1 x Cam Nut (H4) into the hole of Rail (P6). Rotate the cam nut so the arrows
point towards the incoming cam bolt. Insert 1 x Dowel (H1) into Rail (P6). Attach 1 x
Cam Bolt (H3) into Rail (P6) as shown. Attach 3 x Rails (P5) and Rail (P6) to Right
Side Panel (P3), then tighten the cam nuts.
fantasticfurniture.com.au fantasticfurniture.com.au
H5
CL
H6
H5
H5
(P4)
(P5)
(P3)
H5
H5
H5
H6
H5
H5
H5
(P4)
H5
H5
H7
H5
H5
H7
H5
H5
(P5)
(P5)
H4
This is how a cam nut works........
H5
H5
H6
H5
H5
CR
H7
H5
H7
H3
H1
(P6)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Page 6