Table of Contents
Advertisement
5
5.
If you have not already done so: Activate Bluetooth in the settings of the mobile device. Then tap
on "Next".
6.
Now supply the camera with power and wait 2 minutes until the camera has started. Then tap on
"Next".
7.
Select your camera by its identification number. The identification number (DID) of your camera
can be found under the QR code, which is located on your camera and is also enclosed in the
packaging. Then tap on "Next".
8.
Select your home network/WiFi in which you want to operate the camera permanently. Then tap
on "Next".
Note
For optimal start-up, the location services must be activated in the settings.
9
9.
Enter the password of your network. Then tap on "Next".
10. Now assign a security code or admin password. These must be identical for the setup via Bluetooth.
Then tap on "Next".
The admin password can be changed in the camera settings after installation.
6
10
16
7
11
English
8
Advertisement
Table of Contents
