Table of Contents
Advertisement
5
5.
Supply the camera with power and then click on "Search camera in network".
6.
Click on "Switch to WiFi settings".
7.
Connect to the WiFi access point of the camera. You can recognize this by the name "HD-
XXXXXX". The password for the camera's WiFi access point is: "12345678".
8.
Switch back to the App2Cam Plus app and click "Next".
9
9.
Enter the password of your network. Then tap on "Next".
10. Now assign a security code or admin password. These must not be identical when setting up via
WiFi. Then tap on "Next".
11. The camera will now restart. If the start-up was successful up to this point, the app displays the
camera's article number in the "Overview" screen. This can take up to 150 seconds.
12. You have successfully completed commissioning. All settings and functions can be accessed via
the menu bar at the bottom of the screen.
Note
For the best possible camera experience, we recommend that you always operate the
camera with the latest firmware. The current firmware version and available updates can
be found under "Advanced Options" > "Device Settings".
6
10
18
7
11
English
8
Advertisement
Table of Contents
