Cleaning The Plinth Filter - Miele TWJ 660 WP Operating Instructions Manual

Cleaning and care

Cleaning the plinth filter

 Pull the handle out of the plinth filter.
 Clean the filter thoroughly under
running water.
 Squeeze the plinth filter very carefully
several times as you rinse it.
 Rinse the plinth filter until all visible
residues have been removed.
 Use a damp cloth to remove any fluff
from the handle.

Damage caused by a damaged
or worn filter.
If the plinth filter is not functioning
properly, the heat exchanger will be
obstructed. A fault may occur.
Check the plinth filter in accordance
with the descriptions in "Problem
solving guide - Replacing the plinth
filter". If necessary, replace the plinth
filter with a new one.
56
 Fit the plinth filter back on the handle
the right way round.
 Push the plinth filter in completely.
Insert the right guide pin at the same
time.