Table of Contents
Advertisement
Quick Links
©2006 FarmTek™
All Rights Reserved. Reproduction is prohibited
without permission.
Revision date: November 2006rp
ClearView
™
Photo may show a different but similar model.
Panels
STK#
105659
16 Mil
10565920
20 Mil
DESCRIPTION
3 Finished Sides
with Grommets
1 Hem Side
3 Finished Sides
with Grommets
1 Hem Side
Advertisement
Table of Contents
Related Manuals for FarmTek ClearView
Summary of Contents for FarmTek ClearView
- Page 1 ClearView Panels ™ Photo may show a different but similar model. STK# DESCRIPTION 105659 16 Mil 3 Finished Sides with Grommets 1 Hem Side 10565920 20 Mil 3 Finished Sides ©2006 FarmTek™ All Rights Reserved. Reproduction is prohibited with Grommets without permission.
-
Page 2: Assembly Procedure
• Swaged End or Swaged Pipe: The term “swaged'' ClearView™ panels are intended to be used as a porch refers to the tapered end of the pipe or tube. Swaged or patio enclosure or as a room divider. If you intend... -
Page 3: Required Tools
CLEARVIEW PANELS ™ REQUIRED TOOLS The following list identifies the main tools needed to assemble the panel. Additional tools and supports may be needed depending on the location, and application. • Tape measure or measuring device • Variable speed drill •... - Page 4 NOTICE: Accessories are sold separately. Ask your sales associate for details. The following graphics and photos will help you identify parts and accessories available for the ClearView™ panel. Some accessories are required for operation of the roll-up feature. PICTORIAL PARTS GUIDE ClearView ™...
- Page 5 Insert Tek screws through the hem of the panel into the NOTE: Assistance may be required. conduit about 3'' from each end. Assemble Conduits: Gather the Tools and Materials • ClearView™ Panel • Conduit pipes • Metal-cutting saw • Duct tape •...
- Page 6 CLEARVIEW PANELS ™ PREPARE THE FRAME AND HANG THE PANEL INSTALL THE ROLL-UP COMPONENTS Gather the Tools and Materials Gather the Tools and Materials • Screw Hooks • Pulleys • Eye Screws • Rope Cleat • Drill bit • Nylon Cord •...
- Page 7 CLEARVIEW PANELS ™ Attach a length of 1/8'' Nylon cord to the eye screw Feed the cord through all the screw hooks to the rope farthest from the rope cleat. cleat. Run the cord down the back of the panel, under the bottom of the panel, up the front of the panel, and through the pulley.
- Page 8 CLEARVIEW PANELS ™ Tie all the cords together and cut the ends evenly. Run each cord down the back of the panel, under the panel, up the front of the panel, through the pulley, and through any screw hooks to the rope cleat.
-
Page 9: Panel Operation
CARE AND MAINTENANCE Your ClearView™ panel will provide years of trouble free service. To protect your investment follow the tips below. • To remove fine dust from the panel, spray a liquid window cleaner on it and wipe with a soft cloth.