Table of Contents
Advertisement
Problem
The ignitor does not
function properly.
Grill and griddle plate
switch off/cannot be
switched on
Grill and griddle plate
cannot be switched
back on immediately af-
ter switching off
With cooktops using LP
gas a buzzing noise can
be heard during the
heating-up phase.
Frequently Asked Questions
Possible cause and solution
The breaker in the building's wiring system has
tripped.
Contact a qualified electrician or Miele Customer
Service if necessary.
There is food residue stuck between the ignitor and
the burner cap.
Remove any soiling (See "Gas cooktop cleaning
and care").
The grill and griddle plate will be switched off as
soon as you start the Self Clean program on the
oven.
This is not a fault. This has triggered the safety shut-
off.
Turn the control knob for the grill and griddle plate
to Off. As soon as the Self Clean program has
finished, you can switch the grill and griddle plate
back on again.
The grill and griddle plate cannot be turned on while
the Self Clean program is running on the oven.
This is not a fault. This has triggered the safety shut-
off.
Turn the control knob for the grill and griddle plate
to Off. As soon as the Self Clean program has
finished, you can switch the grill and griddle plate
back on again.
The appliance performs a safety check before the
ignitor ignites.
This is not a fault. After a few seconds, the ignitor will
"click" and ignite the gas.
Push in the control knob for the grill or griddle
plate and turn it counterclockwise to High until the
burner ignites.
This is not a fault. The noise will cease after a few
seconds.
83
Advertisement
Table of Contents
