Alpine HALO9 INE-F904D Installation Manual page 10

Refer to the illustration below to use the screw holes for angle
adjustment.
• Example:
To install the display at the angle of 20°, use the screw holes 2
and b.
0°
c
2
b
1
a
20°
2-b
4) After adjustment, secure the display with the 2 angle
adjustment screws (M4×6) (left and right) that were removed
in Step 1 on page 6.
8
-EN
-20°
2-c
45°
2-a
Angle adjustment screws (M4×6)
(left and right)
5
Attach Cover rear-L/R to the left and right sides of the
display unit.
Cover rear R (Included)
• When removing Cover rear-L/R, push in the tab and slide it.
Tab
Cover rear L
(Included)