Table of Contents
Advertisement
Connect the power cord as follows:
1.
Plug the supplied power cord into the power connector on the back
of the LASER CLASS 2060P.
2.
Plug the other end of the power cord into the outlet.
N
The LASER CLASS 2060P has no power switch, so its power is on as long
as it is plugged in. Once connected, though, the unit still needs to warm
up before you can use it.
❏ While the LASER CLASS 2060P is warming up, the message
❏ When the date, the time, the receive mode, and the resolution
N
If the toner cartridge has not been installed yet, the message CHECK
COVER/CART alternates with the standby mode display:
Chapter 2
PLEASE WAIT appears in the LCD display:
mode appear, the LASER CLASS 2060P is in standby mode and
ready for use:
P L E A S E W A I T
1 2 / 3 1 / 2 0 0 1 M O N 1 0 : 0 0
F a x T e l
C H E C K C O V E R / C A R T
1 2 / 3 1 / 2 0 0 1 M O N 1 0 : 0 0
F a x T e l
Setting Up Your LASER CLASS 2060P
S T A N D A R D
S T A N D A R D
2-23
Advertisement
Table of Contents
