Receiving Faxes - Canon LASER CLASS 2060P User Manual

Receiving Faxes

Problem
The LASER CLASS
2060P cannot receive
faxes automatically?
The LASER CLASS
2060P will not switch
between telephone and
fax calls automatically?
13-32
Frequently Asked Questions
Possible cause
The LASER CLASS 2060P
may not be set to receive
automatically.
The LASER CLASS 2060P
may have a document in
memory, leaving very little or
no memory available.
An error may have occurred
during reception.
The paper cassette/the
multi-purpose tray may be
empty.
The telephone line may not
be connected properly.
The LASER CLASS 2060P
may not be in Fax/Tel Mode.
The LASER CLASS 2060P
may have a document in
memory, leaving very little or
no memory available.
Solution
For the LASER CLASS
2060P to receive faxes
automatically, it must be in
FAX ONLY MODE,
ANS.MACHINE MODE, or
Fax/Tel Mode. See page 7-2.
Print out any documents
stored in memory.
See pages 7-12 and 7-13.
Check the LCD display for
an error message. See page
13-40 for a listing of the
LASER CLASS 2060P's error
messages.
Print an activity report and
look for an error code. See
page 12-2.
Make sure the paper
cassette/the multi-purpose
tray has paper in it.
Make sure all telephone line
connections are secure.
For the LASER CLASS
2060P to switch
automatically between
telephone and fax calls, it
must be in Fax/Tel Mode.
See page 7-2.
Print out any documents
stored in memory. See pages
7-12 and 7-13.
Chapter 13