Table of Contents
Advertisement
USER SETTINGS
1.DATE & TIME
2.UNIT TELEPHONE #
3.UNIT NAME
4.TX TERMINAL ID
TTI POSITION
TELEPHONE # MARK
5.SCANNING CONTRAST
LIGHTER
STANDARD
DARKER
6.OFFHOOK ALARM
ON
OFF
7.VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR VOL.
8.RX CALL LEVEL
STANDARD
HIGH
9.TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
15-4
The Menu System
Set the date using the numeric buttons. Set the time (24-hour clock) using
the numeric buttons.
Enter your fax number using the numeric buttons. (Up to 20 digits.)
This is the name that appears at the top of each fax page you send (up to 24
characters). See page 3-8.
Print your ID (transmitting terminal ID) on each page you transmit.
OUTSIDE IMAGE Terminal ID prints outside the image border.
INSIDE IMAGE
Terminal ID prints inside the image border.
You can prefix your number with the abbreviations FAX or TEL in your
sender ID.
FAX
Prefixes the number with the abbreviation FAX.
TEL
Prefixes the number with the abbreviation TEL.
Set the density of the reproduction.
LIGHTER for dark originals.
Originals.
DARKER for light originals.
Turn the offhook alarm off or on, which alerts you if the handset is not in the
handset cradle.
Offhook alarm sounds if handset or extension telephone is left off the hook.
No offhook alarm.
Adjust the volume of the fax unit.
2 (1 to 3)
2 (0 to 3)
2 (0 to 3)
2 (0 to 3)
Adjust the volume of incoming calls.
Level of volume is standard.
Level of volume is high.
Set the telephone line type.
The telephone line is set for touch-tone dialing.
The telephone line is set for rotary pulse dialing. If you need to dial into an
information service that requires tone dialing, use the Tone button on the
operation panel.
(Default settings are shown in bold type)
Chapter 15
Advertisement
Table of Contents
