Starting Up The Projector - BenQ GK100 User Manual

Starting up the projector

1. Install the provided wireless dongle into the wireless dongle port at the rear of the projector. See
details.
2. Connect the power cord to the power adapter.
3. Connect the adapter to the power adapter port.
4. Connect the power cord to a power outlet. The power LED will light up blue.
5. Press the power key on the projector or remote control for 3 seconds. The power LED will turn white.
I
I
3 seconds
When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
6. The fans will start operating and a start-up image will be shown while the projector warms up. This process may take a few minutes. The
projector does not respond to further commands while it is warming up.
1
28
Installing the wireless dongle on page 26
3
2
for