Troubleshooting
If the air conditioner operates abnormally, refer to the following
chart to save time and unnecessary expenses.
Problem
The air
conditioner does
not work at all.
I cannot change
the temperature.
Cool air does not
come out of the
air conditioner.
• Check the power status, then operate the air
conditioner again.
• Switch on the circuit breaker, plug in the
power cord, then operate the air conditioner
again.
• Make sure that the isolator is turned on.
• Check whether the Timed off function is
running. Operate the air conditioner again by
pressing the Power button.
• Check whether the Fan or Fast mode is
running. In these modes, the air conditioner
controls the set temperature automatically,
and you cannot change the set temperature.
• Check whether the set temperature is higher
in the Cool mode mode than the current
temperature. Press the Temperature button
on the remote control to change the set
temperature.
• Check whether the air filter is blocked with
dirt. If the air filter is blocked, the cooling
performance may decrease. Remove dirt
regularly.
• Check whether the outdoor unit is covered
or installed near obstacles. Remove the
coverings and obstacles.
Solution
English
27