Table of Contents
Advertisement
Problem
The Timed on/
off function
does not work.
The indicator
blinks
continuously.
Odours
permeate in the
room during
operation.
An error is
indicated.
Noise is
generated.
Water drops
from the pipe
connections of
the outdoor unit.
• Check whether you pressed the SET button
on the remote control after setting the time.
• Press the Power button to turn off the air
conditioner or disconnect the power plug.
If the indicator is still blinking, contact the
service centre.
• Check whether the air conditioner is
running in a smoky area. Ventilate the
room or operate the air conditioner in the
Fan mode for 3 to 4 hours. (There are no
components used in the air conditioner that
emit a strong odour.)
• Check whether the drains are clean. Clean
them regularly.
• If the indoor unit indicator blinks, contact
the nearest service centre. Be sure to pass
the error code to the service centre.
• When refrigerant flow changes, noise may
be generated, depending on the status
of the air conditioner. This is a normal
operation.
• Condensation may develop when the
ambient temperature changes excessively.
This is a normal operation.
Solution
English
29
Advertisement
Table of Contents
