Control Panel; Programming Your Coffeemaker - Cuisinart DGB-450 Series Instruction Booklet

GETTING TO KNOW YOUR CONTROL PANEL
Clock/LCD Display
Displays time of day and Auto On times.
Program Button with LED Indicator
Sets and/or displays programmed Auto On time.
1-4 Cup Setting
Improves extraction, flavor and temperature
when brewing fewer than 5 cups.
Hour and Minute Buttons
Use to program clock and Auto On.

PROGRAMMING YOUR COFFEEMAKER

SETTING THE CLOCK
When the coffeemaker is plugged in, 12:00 will
flash in the display for 5 seconds, indicating the
unit is in Time Set mode. If 12:00 stops flashing,
simply press and hold Hour or Minute button to
return to flashing Time Set mode.
Setting Hours and Minutes
Press either button to select the desired time.
Hold buttons down to scroll through the digits
quickly, or press and release to advance one
digit at a time. Be sure the PM indicator is on if
setting a PM time.
Exiting Time Set Mode
a. Press any function button besides Hour or
Minute to exit mode.
b. If you do nothing for a period of 5 seconds,
the mode will be exited.
SETTING THE PROGRAM TIME
When you press the Program set button,
it displays a previously selected auto-on time,
or the default time (12:00).
Entering Set Program Time Mode
Press and hold the Program set button until the
blue indicator light and LCD display begin to
flash. You are now in Set Program Time mode.
Grind Off Button with LED Indicator
Turns off the grinder when using pre-ground coffee.
Clean Button
Red indicator appears when it is time to decalcify
your coffeemaker. See page 10 for detailed
decalcification instructions.
Brew/Off Button with LED Indicator
Coffeemaker automatically shuts off after brew
cycle is complete. Manually turns coffeemaker
on or off.
Set the time you want coffee to begin brewing by
following the instructions in "Setting Hours and
Minutes." The coffeemaker will start to brew at
the programmed time. The Program mode cannot
be entered if the coffeemaker is in its brew cycle.
Exiting Set Program Time Mode
a. Press and release Program button.
b. Press any function button besides Hour or
Minute to exit mode and activate the
selected function.
c. If you do nothing for a period of 5 seconds,
the mode will be exited.
To Activate Auto On Using the Set
Programmed Time
To select the time you want coffee to start
brewing, press the Program button. The previously
set time or default time will appear and the blue
indicator will come on to remind you that the
programming function is in use. The brew cycle
will begin at the time you selected. The Brew/Off
blue indicator light will come on at the selected
start time.
To Deactivate Auto On
Press illuminated Brew/Off button; light will go
off, indicating mode is turned off.
6