Advertisement
Introduction
This Quick Installation Guide gives step-by-step
instructions for setting up the D-Link Media
Converter. The model you have purchased may
appear slightly different from those shown in the
illustrations. For more detailed information about
the switch, its components, making network
connections and technical specifications, please
refer to the User's Guide included with your switch.
Connecting to Power
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with
a power voltage of 7.5Vdc/1.5Amp to the DC-Jack
on the converter, and then attach the plug into a
standard AC outlet.
Installing in a Chassis
The Converter can be fit into any of the expansion slots
on a special designed chassis.
Unscrew and
pull out the
First, install the converter onto a carrier supplied with
the chassis:
Step 1- Unscrew and pull out the media converter
board.
Step 2- Plug in the media board to any of the vacant
slot.
Step 3- Fit the converter onto the carrier and use the
screw to secure it.
LED Indicator
LEDs
State
Power
Steady
(PWR)
Lights off
Lights on
LINK-1
Lights off
Lights on
LINK-2
Lights off
Additional Information
If you are encountering problems setting up your
network, please refer to the User's Guide that
came with the switch. It contains many more rules,
charts, explanations and examples to help you get
your network up and running.
Additional
help
is
http://www.dlink.com
in the United States, at
http://www.dlink.co.uk
in the United Kingdom, or
through our offices listed at the back of the User's
Guide.
2
Indication
Power on
Power off
Linking on port FX-1
Not Linking
Linking on port FX-2
Not Linking
available
online
at
Advertisement
