Technical Data; Definitions: Safety Guidelines - DeWalt D28715 Original Instructions Manual

English
HEAVY-DUTY 355 mm CHOP SAW WITH QUICK-CHANGE
CLAMP D28715
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power Input
No-load speed
Min. peripheral speed cutting disc
Disc diameter
Disc bore
Disc body thickness
Thread size of spindel
Type of cutting disc straight, non-recessed
Cross-cutting capacity at 90˚
circular
square
rectangular
angular
Cross-cutting capacity at 45˚
circular
square
rectangular
angular
Weight
Noise values and/or vibration values (triax vector sum) according to
EN62841-3-10:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
4
WALT one of the
e
D28715 D28715 (LX)
V
230 115
AC
V
230 115
AC
15 15
W
2200 2200
-1
min
4000 4000
m/s
80 80
mm
355 355
mm
25.4 25.4
mm
3.1 3.1
M10 M10
mm 110
mm 110 x 110
mm 100 x 200
mm 140 x 140
mm 110
mm 110 x 110
mm 100 x 140
mm 120 x 120
kg 18.5 18.5
dB(A) 100 98
dB(A) 112 111
dB(A) 3 3
m/s 2 6.2 5.3
m/s 2 1.5 1.5

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Chop Saw
D28715
D WALT declares that these products described under Technical
e
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-3-10:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
21.04.2020
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WALT at
e
WALT.
e