Note: After installation, ensure that you connect the orange cable to the connector labeled Orange on the
card, the blue cable to the connector labeled Blue, the white and grey cable to the M1 connector, and the
black and grey cable to the M2 connector.
Speaker assembly
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 33.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one.
4. Remove the base cover assembly. See "Base cover assembly (T14 Gen 2 and P14s Gen 2)" on page 34
or "Base cover assembly (T15 Gen 2 and P15s Gen 2)" on page 36.
Removal procedure
42
T14 Gen 2, T15 Gen 2, P14s Gen 2, and P15s Gen 2 User Guide
and print the following instructions.