Base Cover Assembly (T15 Gen 2 And P15S Gen 2) - Lenovo ThinkPad P15s Gen 2 User Manual

Base cover assembly (T15 Gen 2 and P15s Gen 2)

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 33.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one.
4. Turn over the computer.
Removal procedure
36
T14 Gen 2, T15 Gen 2, P14s Gen 2, and P15s Gen 2 User Guide
and print the following instructions.