Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KATVBKSTNDA
Summary of Contents for Kogan KATVBKSTNDA
- Page 1 SWIVEL TABLETOP STAND WITH GLASS BASE (FOR 32”-70” TVS) KATVBKSTNDA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • Read all instructions before use, and retain this user guide for future reference. • Ensure you have located all components before disposing of any packaging materials. • This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. - Page 4 DIMENSIONS...
- Page 5 COMPONENTS Parts:...
- Page 6 Hardware: A1 x 4 A2 x 3 A3 x 3 A4 x 2 A5 x 3 A6 x 4 A7 x 2 A8 x 2 A9 x 2 A10 x 1 A11 x 1 A12 x 2 M-A (M5x14) x 4 M-B (M6x14) x 4 M-C (M6x30) x 4 M-D (M8x30) x 4...
- Page 7 ASSEMBLY Step 1: Add adhesive feet (A1) to the main base (B1). Step 2: Fit end piece (B5) to the stand (B2).
- Page 8 Step 3: Align the swivel base (A6) with the stand (B2) and fit with x2 A4 screws, using the Allen key (A10) to tighten the screws. Step 4: Next, fit the main base (B1) to the swivel base (A6), using the x3 A2 and A3 washers and x3 A5 screws.
- Page 9 Step 5: Use the Allen key (A10) to loosen the screws from the stand’s mounting fixture. This will allow it to be set at your ideal TV height. Once determined, refit the mounting fixture with the same screws. Use the spanner (A11) to fit the A9 nuts, and a Phillips head screwdriver (not supplied) to fit the A7 screws with A6 washers.
- Page 10 Step 6: Using a Phillips head screwdriver, fit the support beam (B3) to the mounting fixture with the A8 screws and A6 washers. Step 7: Use a Phillips head screwdriver to remove the locking screws from the x2 mounting rails (B4). Keep these screws nearby, as they will be required at a later step.
- Page 11 Note: Refer to either Step 8a or Step 8b depending on your TV. Ensure the screws fixing the mounting rails to your TV fit correctly. If spacers (M-G, M-H) are required for a proper fit, follow Step 8b. Step 8a:...
- Page 12 Step 8b:...
- Page 13 Step 9: Once the mounting rails are securely fitted to your TV, lift your TV (Lifting with two people is recommended at all times) and align the opening of the mounting rails with the support beam. Fit the x2 cable management clips (A12) to the stand.
- Page 14 Step 10: With the TV mounted to the stand, use a Phillips head screwdriver to replace the locking screws from the mounting rails (see Step 7) to secure the TV. Use the spanner to adjust the angle of the mounting fixture. Use the cable management clips (A12) to secure any cords or cables on your TV.
- Page 15 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...