Kogan KAM362CHWZA User Manual page 4

•
The refrigerator must be disconnected from the source of electrical supply before
attempting the installation of an accessory.
•
Refrigerant and cyclopentane foaming material used for the appliance are
flammable. Therefore, when the appliance is scrapped, it shall be kept away from
any fire source and be recovered by a special recovering company with a
corresponding qualification other than being disposed of by combustion, so as to
prevent damage to the environment or any other harm.
•
Children should be supervised to ensure that they do not play with the appliance.
Warning: To avoid a hazard due to the instability of the appliance, it must be fixed
•
in accordance with the instructions.
• Warning: Connect to potable water supply only. (suitable for ice making machine)
•
To prevent a child from being entrapped, keep out of reach of children and not in
the vicinity of the freezer (or refrigerator). (suitable for products with locks)
Meaning of safety warning symbols
Prohibited Symbol
Warning Symbol
Note Symbol
Electricity Related Warnings
This symbol indicates prohibited matters and those
behaviours are forbidden. Non-compliance with the
instructions may result in product damages or endanger
Prohibition symbols the personal safety of users.
This symbol indicates matters that must be followed and
those behaviours must be strictly executed in line with the
operational requirements. Non-compliance with the
instructions may result in product damages or endanger
Warning symbols the personal safety of users.
This symbol indicates matters to pay attention to and these
behaviours shall be specially noted. Due precautions are
needed or minor or moderate injuries Note symbols or
damages of the product will be caused.
•
Do not pull the power cord when pulling the power plug of
the freezer. Please firmly grasp the plug and pull out it
from the socket directly.
•
Do not damage the power cord under any condition to
ensure safety use, do not use when the power cord is
damaged or the plug is worn.
•
Worn or damaged power cord shall be replaced in
manufacturer-authorised maintenance stations.
•
The power plug should be firmly contacted with the socket
or else fires might be caused. Please ensure that the
grounding electrode of the power socket is equipped with
a reliable grounding line.