Table of Contents
Advertisement
2.1 Overview
This chapter describes how to access the WRE6605 Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy system setup and
management via Internet browser. Use a browser that supports HTML5, such as Internet Explorer 11,
Mozilla Firefox, or Google Chrome. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to
Chapter 6 Troubleshooting
Explorer.
2.2 Accessing the Web Configurator
Make sure your WRE6605 hardware is properly connected and prepare your computer or computer
1
network to connect to the WRE6605. Your computer needs to be in the same subnet as the WRE6605.
Set a static IP address between 192.168.1.3~192.168.1.254.
Launch your web browser.
2
Open a web browser and type "http://192.168.1.2" as the web address in your web browser.
3
Note: To log in to the WRE6605's Web Configurator after the installation is completed use
FindMe to obtain the WRE6605's new IP address. See
2.2.1 Web Configurator Languages
The Web Configurator displays in the same language as your browser language. The Web Configurator
is available in 6 different languages:
Table 4 Web Configurator Languages
LANGUAGES
English
German
The Web Configurator
to see how to make sure these functions are allowed in Internet
WRE6605 User's Guide
C
H A P T E R
Section 2.4.2 on page
13
2
20.
Advertisement
Table of Contents
