RaceAmerica Racetrack Leader Boards
begin a second driver installation creating a PC
COM port for use by the software. This process
can take several minutes to recognize the newly
installed device so be patient. Once the ionstall is
complete, Windows will display a message with
the PC COM port number (i.e. COM3, COM7,
etc). The PC software will prompt for which
PC COM poirt to use so note the COM number
displayed by Windows.
Run the RaceAmerica software and select
the PC COM port to connect to the USB WIreless
Unit. The scoreboard and software are ready to
use.
LEADER BOARD MAINTENANCE
The Leader Boards do not require any
maintenance to maintain proper operation. To
clean the red lens, use a non-abrasive cleaner with
a soft cloth. This will keep the protective lens
clean and maximize visibility and clarity of the
digits. If the red lens is soiled with mud or dirt,
gently remove the grit using a soft cloth/water
being careful not to press when wiping to avoid
scratching the red lens acrylic material.
SPARE PARTS
Further to minimize race program
interruptions, RaceAmerica recommends some
spare parts. While the Leader Board may not shut
down the racing action, a spare USB Wireless
Unit and antennas should be considered. Contact
RaceAmerica for availability and pricing of spares
items.
SUPPORT AGREEMENTS
Support agreements are available from
RaceAmerica providing Telephone Assistance on
technical issues and operational questions, repair
and/or replacement of hardware failures, Software
and Firmware updates and bug reporting. Contact
RaceAmerica for more information and pricing of
Support Agreements.
10